VXI VT1508A User Manual

Eight-ChannelFixed Filter and AmplifierSignal Conditioning Plug-onVT1508AUser’s ManualThe VT1508A manual also applies to Agilent/HP E1413Bs as Agilent

SpecificationsThese specifications for the VT1508A reflect the combined performance of theVT1413C or Agilent/HP E1313 and the VT1508A Signal Condition

Measurement accuracyDC Volts(90 days) 23°C±1°C (with *CAL? done after 1 hr warm up and CAL:ZERO? within 5min.). If autoranging is ON, add ±0.02% FS to

Measurement accuracyTemperature (cont.)Thermocouples (cont.)(simplified specifications, see temperature accuracy graphs in VT1413C manual for details)

VT1508AEight-Channel Fixed Filter and AmplifierSignal Conditioning Plug-onIntroductionThe VT1508A is a Signal Conditioning Plug-on that provides eight

Connecting To The Terminal ModuleThis section shows how to make connections to the Terminal Module.The SCP connections for the Terminal Modules are sh

Connecting To The Terminal Module VT1508A Fixed Filter+Amplifier SCP 5Figure 2 VT1508A B-size Terminal Module Connections (Ch 00-31)Figure 3 VT1508A B

Programming With SCPI CommandsThe SCPI commands shown here are covered in Chapters 3 and 5 of your VT1413Cor Agilent/HP E1313 manual. This section wil

·The channel parameter must specify a single channel.To query the filter state of channel 2 sendINP:FILT? (@102)query channel 2enter statement hereQue

NOTES 1) When OTD is enabled, the inputs have up to 0.2 µA injected into them. If thiscurrent will adversely affect your measurement, but you still wa

VT1508A Register MapRead (returned value) Write( <regvalue>) SCP Register <regaddr> ValueSCP ID (901016)Whole SCP Reg 0 00ppp0000002ppp=Pl